I used Nikon D90 (after quartz conversion) + Nikkor EL 80 mm, but now I realized there is no such combination in MicaToolbox. Is there any chance you could add it (including vision of dog, blue tit, human, domestic fowl, D65 etc.)? I learned from your paper (Troscianko & Stevens 2015), that you investigated sensitivities of Nikon D90, so perhaps it wouldn’t be a big problem….
Thank you in advance.
Thank you for explanations. I’ll try to test D7000 + Novoflex Noflexar sensitivities first. How can I verify this setup? I assume that if I photograph colour chart, RGB values from my camera, should correspond to known RGB values of the colour chart. However, how to verify readings from UV range of spectrum? Should I, for example, photograph Spectralon grey standards (assuming that they reflect exactly e.g. 10%, 20% , 30% of UV)? Thank you in advance for a help.
Yes I have calibrated a D90, however that was with the Nikon Nikkor 105mm f/2.4 lens (the modern lens, which is very poor in UV). You’re using the old Nikkor EL 80mm lens, which is very different.
I would guess that the D90’s sensitivities are very close to the D7000 family, and the Nikkor 80mm is likely to be closest to the Novoflex Noflexar transmission. So that’s probably the best model to use. You could verify this yourself against a colour chart.
Alternatively, if you have a spectrometer you could make your own UV calibration chart (see the user guide – this only works with natural sunlight and you need to measure the chart using sunlight).